Transfer Molding

Precision Transfer Molding Solutions

Transfer molding, a closed-mold process, offers better precision and eco-friendliness than compression molding. With higher pressures than injection molding, it improves resin saturation in reinforcing fibers. It can start with solid materials, potentially reducing costs and time, despite a slower fill rate.

In rubber-to-metal bonding, transfer molding excels, ensuring strong and durable bonds between rubber and metal components through precise dimensional control, meeting industry standards.

Transfer Molding-02

Transfer Molding Process

Material Selection
Choose the appropriate material for the desired product. Common materials include thermosetting plastics like phenolic, epoxy, and rubber compounds.

Prepare the material by cutting or shaping it into the desired size and form. This material is typically in the form of pre-measured pellets, powders, or sheets.

Mold Design
Create or procure a mold that corresponds to the final shape of the product. The mold typically consists of two halves, with one containing a cavity for the product and the other serving as the mold’s cover.

Preheat the mold to a specific temperature suitable for the chosen material. This temperature is often based on the material’s melting or curing point.

Place the pre-cut or pre-measured material into one half of the mold, typically referred to as the “bottom” or “lower” mold.

Closing the Mold
Close the mold by bringing the other half, the “top” or “upper” mold, down onto the material. This action compresses the material and shapes it into the desired form.

Applying Pressure and Heat
Apply pressure to the mold. The combination of pressure and heat causes the material to flow and fill the mold cavity, taking on the desired shape. The pressure helps in achieving uniform distribution of the material.

Curing or Cooling
Maintain pressure and temperature for a specific duration, allowing the material to cure or cool and harden. The curing time varies depending on the material used and the part’s complexity.

Opening the Mold
After the curing or cooling process, release the pressure and open the mold. This reveals the molded product, which should have taken on the desired shape and properties.

Ejecting the Product
If necessary, eject the product from the mold cavity. Some products may release easily, while others might require additional mechanisms or tools for removal.

Scroll to Top